An Expert Guide to Assessment Validation: Validating Assessments

An Expert Guide to Assessment Validation: Validating Assessments

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.

Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

We are required by the standards to carry out two types of validation.

The initial validation type checks that your RTO's assessments align with the training package requirements.

The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.

This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.

A Look at the Two Types of Assessment Validation

Decoding Assessment Validation

As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.

Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

In this article, we will emphasize assessment tool validation.

How to Conduct Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

Appropriate Times for Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Hence, whenever new learning resources are bought, assessment tool validation is necessary before student use.

There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.

Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:

- you update resources
- you add new training products on scope
- training product updates are reviewed against your course
- your learning resources get identified as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.

What Training Products Should Be Validated?

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Resources Needed to Start Assessment Tool Validation

Educational Materials

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.

Panel of Validators

Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.

Your validation panel, as a group, must possess:

Current vocational competencies and relevant industry skills for the unit being validated

Recent knowledge and expertise in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or an updated successor

Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:

Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment assessing what it is supposed to assess? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment achieve consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Evidence Core Rules

Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work is the candidate’s own?

Currency – Do the assessment tools mirror current units of competency and modern industry practices?

Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To avoid employing learning click here resources that leave unit requirements unmet, be sure to adhere to these guidelines:

Act on Your Words

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappying

prepare bottles, bottle-feed babies, and clean equipment

prepare solid food and feed babies

respond suitably to baby signs and cues

settle infants for sleep and prepare them

monitor and foster physical exploration and gross motor skills appropriate for the age

Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.

Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Complete Compliance or Not Competent

Mind the lists. Again, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What can be included in a work package?

Possible answers may include:

Essential resources

Associated expenses

Time assigned for activities

Assigned duties and responsibilities

If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental concern in the work area and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – work area isolation, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolating, engineering controls, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolation, use of engineering controls, administration

Equipment or machinery – isolation, use of engineering controls, administration

Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.